Request a Quote




Message / Order details:

Amac Amac

D Cable Block, Lifter & Pole Hanger Bracket

Get a Quote

This block is used for supporting a single cable up to 2-3/4 in. (70 mm) in diameter on 1/4 - 3/8 in. (6-10 mm) bare strand prior to the lashing process.

D Cable Block:

  • The frame and sheave are made from 100% heat-treated aluminum alloy.
  • The sheave contains oilite bearings for a smooth pulling operation and a long-lasting life span.
  • Contains steel inserts on the underside of each strand hook for smoother pulling and less wear.
  • Lever-actuated bi-directional cam locks the frame on the strand to prevent travel while pulling in cable.
  • Cam automatically releases the block when pushed by the lasher from the other direction.
  • Contains an eye hook that allows you to lift the unit and lock it into place from the ground. (See D Cable Block Lifter) These units are normally placed anywhere from 15 ft. to 25 ft. apart on the strand depending on the cable weight and pulling conditions.
  • 300 lbs. (136 kg.f) load capacity rating.

D Cable Block Lifter:

  • D Cable Block Lifter is specially made for putting D Cable Blocks onto suspension strand.
  • Make block placement from the ground fast and easy.
  • Rugged aluminum alloy material.
  • Use with Extension Handles (Lay-up Sticks).
  • A cradle supports the block while a hook operates the block cam lever.

D Cable Block Hanger Bracket:

  • Used for hanging cable blocks at the pole as temporary support for cable or wire. Can be mounted on "J" brackets or suspension/extension bolts.